FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 3230 Parts

Category: Hitch / Drawbar

[Categories] [All 3230 Parts] [All Farmall Models]

Leveling Box Assembly - Cat II, 13-5/8 inch screw. For tractor models 3220, 3230, 395, 4210, 4230, 4240, 495, 595, 695, 895, 995. (Item #: 113621, Ref: 1713-1003) $173.00

Leveling Box Assembly - Cat II, 15.25 inch screw. For tractor models 3220, 3230, 395, 4210, 4230, 4240, 495, 595, 695, 895, 995. (Item #: 124555, Ref: 1713-1004) $115.00

Leveling Box Fork - This Leveling Box Fork is 14.50 inches long, has a 1-5/8 inch fork width and 0.875 inside diameter. This is a CAT II part. It is used on 3220, 3230, 395, 4210, 4230, 4240, 495, 574, 584 Indust/Const, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995. It is used with 527937R1 Nut, not included. Replaces 402635R4. (Item #: 110393, Ref: 402635R4) $77.00

Leveling Box Screw - This level box screw with bevel gear is 0.875 inches dia, 18.125 inches long. Tractors: 3220, 3230, 395, 4210, 4230, 4240, 495, 595, 695, 895, 995. Replaces 223322, 3072422R2, 3116725R91, 3121964R4. (Item #: 124707, Ref: 3116725R91) $62.62

Leveling Fork Nut - This Leveling Fork Nut is used with 3121964R1 and 402635R4 fork. Replaces original part number 527937R1. (Item #: 110735, Ref: 527937R1) $7.00

Leveling Rod Fork - Housing, leveling screw. Cat I. (14.500 inches long) 1 inch wide fork. Tractors: Hydro 84, 385, 395, 454, 464, 484, 485, 495, 574, 584, 585, 595 with fixed lower link, 674, 684, 685 with fixed lower link, 695, 784 with fixed lower link, 895, 995 ; 3220, 3230 with out telescopic lower link; 4210, 4230, 4240 with out telescopic lower link. (Item #: 108812, Ref: 3121964R91) $66.00

Leveling Yoke Left Hand - This Left Hand Leveling Yoke is 19.250 inches long and 0.875 inch, 9 UNC thread. It replaces original part numbers 527935R1, 527948R91 (Item #: 124678, Ref: 527948R91) $33.60

Universal Parts and Accessories
Category: Hitch / Drawbar

Center Link Pin - For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

Check Chain and Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $9.20

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $364.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $364.00

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $439.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $439.00

$Farmall 3230 Drawbar, Universal Cat I, 20-1\2 Inch$
Drawbar, Universal Cat I, 20-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $57.00

$Farmall 3230 Drawbar, Universal Cat I, 25-1\2 Inch$
Drawbar, Universal Cat I, 25-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $39.30

$Farmall 3230 Drawbar, Universal Cat I, 29-3\4 Inch$
Drawbar, Universal Cat I, 29-3/4 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $48.80

$Farmall 3230 Drawbar, Universal Cat I, 30-1\8 Inch$
Drawbar, Universal Cat I, 30-1/8 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103174, Ref: S125) $42.10

$Farmall 3230 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126) $57.00

$Farmall 3230 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155) $57.00

$Farmall 3230 Drawbar, Universal Cat II, 36-1\4 Inch$
Drawbar, Universal Cat II, 36-1/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $132.00

$Farmall 3230 Drawbar, Universal Cat II, 36-29\32 Inch$
Drawbar, Universal Cat II, 36-29/32 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $94.00

$Farmall 3230 Drawbar, Universal Cat II, 36-3\4 Inch$
Drawbar, Universal Cat II, 36-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156) $75.91

$Farmall 3230 Drawbar, Universal Cat II, 39-3\8 Inch$
Drawbar, Universal Cat II, 39-3/8 Inch - Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $99.00

$Farmall 3230 Drawbar, Universal Cat III, 42-3\4 Inch$
Drawbar, Universal Cat III, 42-3/4 Inch - Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $284.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Leveling Assembly - Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $31.10

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.60

Linch Pin, Pack of 2 - Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $1.30

Linch Pins, Pack of 2 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $1.10

Linch Pins, Pack of 2 - Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.20

Linch Pins, Pack of 2 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $1.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $45.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324) $41.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $61.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $55.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330) $64.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $60.00

Mower Deck Height Stabilizer Kit - Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $36.00

Quick Hitch A-Frame Design - Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor�s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $337.00

Quick Hitch A-Frame Implement Adapter - Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $103.21

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101) $330.00

Stabilizer Assembly - This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $21.90

Stabilizer Chain - This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $27.40

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $62.00

Stabilizer Link - This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $30.60

Top Link - Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91) $27.30

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $25.70

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories] [All 3230 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy